Mercedes‑Benz SLC remap Stoke‑on‑Trent
We hold 6 Mercedes-Benz SLC engines across 1 generation, 2016 to 2020. The biggest typical Stage 1 gain is the 3.0 Petrol 390hp: 385bhp stock to around 435 to 460bhp.
A Stage 1 remap for the Mercedes-Benz SLC costs £249 and Stage 2 costs £349, at our unit in Fenton, Stoke-on-Trent. We hold 6 SLC engines across 1 generation. Pick yours below for the typical power and torque after each stage, then message us with your reg.
Find your engine
| Engine | Stock | Stage 1 (typical) | ||
|---|---|---|---|---|
| Petrol | ||||
| 154bhp | 185 to 195 | |||
| 181bhp | 215 to 230 | |||
| 242bhp | 280 to 300 | |||
| 362bhp | 410 to 435 | |||
| 385bhp | 435 to 460 | |||
| Diesel | ||||
| 201bhp | 235 to 250 | |||
Stock and typical Stage 1 power: 2016 to 2020
StockStage 1 (typical, up to)
Figures are typical gains for this engine; your exact result depends on the car's condition and the file. Message us with your reg for the exact figure.
Mercedes-Benz SLC FAQ
Mercedes-Benz SLC remap questions
Stage 1 is £249 and Stage 2 is £349. Pops and bangs are an extra £80.
At our workshop: Unit 15 Fenpark Industrial Estate, Fenton, Stoke-on-Trent ST4 3JP. Open Mon to Fri 9am to 6pm and Saturday 10am to 5pm.
The biggest typical Stage 1 gain is on the 3.0 Petrol 390hp: from 385bhp to 435 to 460bhp. The table shows every engine; message us with your reg for the exact figure.
Still have a question? Message us with your reg and what you would like done.