BMW 6 Series remap Stoke‑on‑Trent
We hold 20 BMW 6 Series engines across 3 generations, 2003 to 2023. The biggest typical Stage 1 gain is the 4.4 650i 450hp: 444bhp stock to around 495 to 530bhp.
A Stage 1 remap for the BMW 6 Series costs £249 and Stage 2 costs £349, at our unit in Fenton, Stoke-on-Trent. We hold 20 6 Series engines across 3 generations. Pick yours below for the typical power and torque after each stage, then message us with your reg.
Find your engine
| Engine | Stock | Stage 1 (typical) | ||
|---|---|---|---|---|
| Petrol | ||||
| 242bhp | 280 to 300 | |||
| 254bhp | 295 to 310 | |||
| 316bhp | 360 to 385 | |||
| 328bhp | 375 to 395 | |||
| 335bhp | 380 to 405 | |||
| Diesel | ||||
| 187bhp | 220 to 230 | |||
| 261bhp | 300 to 315 | |||
| 282bhp | 320 to 340 | |||
| 316bhp | 355 to 375 | |||
| 335bhp | 375 to 400 | |||
| Engine | Stock | Stage 1 (typical) | ||
|---|---|---|---|---|
| Petrol | ||||
| 316bhp | 360 to 385 | |||
| 395bhp | 445 to 470 | |||
| 401bhp | 450 to 480 | |||
| 444bhp | 495 to 530 | |||
| Diesel | ||||
| 309bhp | 350 to 370 | |||
| Engine | Stock | Stage 1 (typical) | ||
|---|---|---|---|---|
| Petrol | ||||
| 254bhp | 265 to 280 | |||
| 268bhp | 280 to 295 | |||
| 328bhp | 345 to 360 | |||
| 362bhp | 380 to 400 | |||
| Diesel | ||||
| 282bhp | 320 to 340 | |||
Stock and typical Stage 1 power: G32
StockStage 1 (typical, up to)
Figures are typical gains for this engine; your exact result depends on the car's condition and the file. Message us with your reg for the exact figure.
BMW 6 Series FAQ
BMW 6 Series remap questions
Stage 1 is £249 and Stage 2 is £349. Pops and bangs are an extra £80.
At our workshop: Unit 15 Fenpark Industrial Estate, Fenton, Stoke-on-Trent ST4 3JP. Open Mon to Fri 9am to 6pm and Saturday 10am to 5pm.
The biggest typical Stage 1 gain is on the 4.4 650i 450hp: from 444bhp to 495 to 530bhp. The table shows every engine; message us with your reg for the exact figure.
Still have a question? Message us with your reg and what you would like done.