Jeep Commander remap Stoke‑on‑Trent
We hold 6 Jeep Commander engines across 2 generations, 2006 on. The biggest typical Stage 1 gain is the 3.0 V6 218hp: 215bhp stock to around 250 to 265bhp.
A Stage 1 remap for the Jeep Commander costs £249 and Stage 2 costs £349, at our unit in Fenton, Stoke-on-Trent. We hold 6 Commander engines across 2 generations. Pick yours below for the typical power and torque after each stage, then message us with your reg.
Find your engine
| Engine | Stock | Stage 1 (typical) | ||
|---|---|---|---|---|
| Diesel | ||||
| 168bhp | 200 to 210 | |||
| Engine | Stock | Stage 1 (typical) | ||
|---|---|---|---|---|
| Petrol | ||||
| 210bhp | 220 to 230 | |||
| 228bhp | 240 to 250 | |||
| 322bhp | 340 to 355 | |||
| 329bhp | 345 to 360 | |||
| Diesel | ||||
| 215bhp | 250 to 265 | |||
Stock and typical Stage 1 power: 2021 on
StockStage 1 (typical, up to)
Figures are typical gains for this engine; your exact result depends on the car's condition and the file. Message us with your reg for the exact figure.
Jeep Commander FAQ
Jeep Commander remap questions
Stage 1 is £249 and Stage 2 is £349. Pops and bangs are an extra £80.
At our workshop: Unit 15 Fenpark Industrial Estate, Fenton, Stoke-on-Trent ST4 3JP. Open Mon to Fri 9am to 6pm and Saturday 10am to 5pm.
The biggest typical Stage 1 gain is on the 3.0 V6 218hp: from 215bhp to 250 to 265bhp. The table shows every engine; message us with your reg for the exact figure.
Still have a question? Message us with your reg and what you would like done.